Low center of gravity design, the center of gravity is not more than 65mm; with double openings, convenient for vertical shooting; with red sphere of approx. Use lever principle, resulting in high locking force, lock the ball firmly, Max. Vertical load is about 30kg, Max. Bearing when tilted in 90 degrees is about 10kg; 4. When tilted in 90 degrees, the vertical error between the clamp and the ground is less than 3 degrees; when tilted in 45 degrees with bearing, after locking the ball, the free hang down range of the clamp is not more than 1mm; 5.
Top is a clamp of 64mm in diameter, with a spirit level and a compass, jaws using RRS / ARCA-SWISS 39mm standard, can be replaced for upgrading; 6. The bottom diameter is approx. 66mm, using UNC 3/8 screw hole; 7.
The ball is locked by a metal master knob of approx. 37mm in diameter, the knob is also provided with a separate damping setting knob; 8. Bottom is a 360 degrees panoramic base, every 30 degrees as one segment, and the error is approx.
1 degree; with independent control knob, and built-in damping oil in the base. Made of aviation aluminum, CNC precision machining, non-slip rubber pads at the front side, drop-proof screw at the back side, comes with 1/4 stainless steel screw; 2. Improved design, the maximum size is about 60 x 38.5 x 10mm, weight about 40g; 3.With standard AS interface, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI ball head and clamp of AS standard interface. 1 x iShoot Ball Head IS-FB52JZ64 1 x Quick Release Plate QS-60.
(The other items in the photos not listed here are for illustrating only, not included). This item is in the category "Cameras & Photo\Tripods & Supports\Other Tripods & Supports".
The seller is "lilyrst" and is located in this country: CN. This item can be shipped worldwide.