Quick Release Plate

SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless

SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless
SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless

SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless

SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless. IMPORTANT NOTES about pre-order item.

Retro Handheld Cage Kit 3872. SmallRig Multifunctional Cage for FUJIFILM X-T5 4135. Is designed to protect the camera and provide accessory mounting points.

It secures the camera via one 1/4-20 screw at the bottom and one M2 screw on both sides, with rubber pads preventing scratches, and gives full access to buttons, card slots, screen, and battery door. Apart from a built-in grip for enhanced grip experience, the cage also has various accessory mounts.

They include (among others) 1/4"-20 threaded holes, 3/8"-16 threaded holes, and ARRI 3/8"-16 locating holes that support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto-type Quick Release Plate 1280 & 2458, Power Bank Holder 2336 and mini V-Mount Battery Plate 2987; and two 1/4"-20 locating holes on one side for Single Rod Clamp 3598, Magic Arm 3873. On its top and left side there are NATO rails to quickly connect NATO Top Handle 3766, Monitor Mount 2906B, or Rotating NATO Side Handle 3847. Besides, the cage comes with cold shoe mounts to install a microphone, LED video light, etc. A QD port for a quick-release QD shoulder buckle; and an Arca-Swiss quick-release plate at the bottom for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbal for quick switch between gimbal, handheld and tripod modes. A screwdriver is also included for easy assembly and disassembly. A complimentary shutter button helps improve touch. Please remove the split D-ring before installing this cage. Product Dimensions: 145 x 58.7 x 105.6mm. Package Dimensions: 162 x 121 x 71mm. SmallRig L-Shape Grip for FUJIFILM X-T5 4136. Is designed to improve your grip on the camera. With the same texture and color, it matches FUJIFILM F2 perfectly.

The grip easily locks the camera via a mere 1/4-20 D-ring thumbscrew at the bottom, where multiple accessory mounts are included too. They include an Arca-Swiss quick-release plate for Arca-Swiss tripods, three 1/4-20 holes for tripods or Manfrotto-type plates, and a strap slot for Hand Strap 3848. The grip features a slim and compact baseplate that weighs only 79g. It also comes with a shutter button to enhance touch.

Product Dimensions: 133.2 x 58.1 x 69mm. Package Dimensions: 184 x 101 x 57mm.

Material(s): Aluminum Alloy, Silicone. Arca-Swiss quick release plate on the bottom and the side for quick switch between horizontal and vertical modes. Bottom Arca-Swiss mount for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Varied accessory mounts for use in multiple scenes: 1/4"-20 threaded holes, 3/8"-16 threaded holes, QD port, etc.

Stretchable side plate allows cables through in vertical mode. Is designed to facilitate the switch between horizontal and vertical modes and to improve grip experience. It locks the camera via one 1/4-20 screw and one locating pin at the bottom, with rubber pads preventing scratches, and gives full access to buttons, card slots, battery door, and flip screen. Apart from a built-in blackwood grip for an enhanced grip experience, the plate also has various accessory mounts. At its bottom there is an Arca-Swiss quick-release plate for Arca-Swiss tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals, 1/4"-20 threaded holes, and 3/8"-16 threaded holes that support Manfrotto-type plate 1280 or Side Handle 2093 for a handheld vertical shot.

For further security, a strap slot and a QD port are available for attaching Hand Strap 3848 & 2456 or quick-release QD shoulder buckle. Besides, the side plate features 1/4-20 threaded holes to mount Cold Shoe Mount BUC2736 for the microphone, etc.

And can be stretched to allow cables through. Other highlights include a magnetic slotted screwdriver for easy assembly and disassembly and a complimentary shutter button which helps improve touch. 140.3 x 58.2 x 84.2mm. US based listing will be sent from US warehouse. We are based in China, and we have warehouses in United States, United Kingdom, Germany and Australia.

For consumers who are not in countries above we will send the item from China. We have been in this field for over 9 years. Arca-Swiss quick release plate, Ergonomic blackwood grip, A included shutter button. This item is in the category "Cameras & Photo\Camera, Drone & Photo Accessories\Other Camera & Photo Accs". The seller is "newbegindj" and is located in this country: CN.

This item can be shipped worldwide.
  • model name: 3872-handheld rig
  • Brand: SmallRig
  • Type: camera rig
  • To Fit: camera
  • Compatible Brand: For Fujifilm
  • Features: Arca-Swiss quick release plate, Ergonomic blackwood grip, A included shutter button
  • Compatible Series: for FUJIFILM X-T5
  • Compatible Model: for FUJIFILM X-T5
  • Model: 4135/4136/4137/3870/3872

SmallRig X T5 Arca-Swiss L-Bracket Camera Cage for FUJIFILM X-T5 Mirrorless