Manfrotto MH057M0-Q5 Magnesium Ball Head withQuick Release Plate
Manfrotto MH057M0-Q5 Magnesium Ball Head w/Quick Release Plate. His 057 Magnesium Ball Head from Manfrotto features an integrated RC5 quick release cam lock and a 501PL Quick Release Plate. Compatible quick release plates can removed from the head by pulling the cam lock's spring-loaded lever, which also allows the plate to be instantly reattached. The cam lock also features a safety catch to prevent a compatible quick release plate from accidentally disconnecting.
The 057 Magnesium Ball Head with 501PL Quick Release Plate has a load capacity of 33.1 lb and can be attached to tripods or other support systems that feature a 3/8-16 mount. Toward the ball head's base is a secondary locking knob that controls the ability to rotate the head 360°. An additional knob opposite the secondary locking knob can be rotated to apply tension control to the ball-and-socket joint's movements.
Finally, a two-position slide-switch at the base of the ball-and-socket joint allows it to be tilted down to either a 90° or a 103° angle before it is locked into place using the primary locking knob. The ability to tilt the ball-and-socket joint down to angle beyond 90° can be used to quickly level a camera placed on this 057 Magnesium Ball Head without having to adjust the tripod the ball head is connected to. Cameras or accessories that are compatible with a 1/4"-20 or 3/16"-20 mount can be connected to the 501PL Quick Release Plate which measures 2.0 x 3.5 x 0.4 and has a rubberized, non-slip surface.
Head Type Ball Head Base Mount 3/8"-16 Thread Camera Mounting Screw 1/4"-20 Male, 3/8"-16 Male Quick Release Plate Type Q5 Load Capacity 33.1 lb / 15.01 kg Number of Bubble Level(s) 3 Friction Control Yes Independent Pan Lock Yes Material Magnesium Pan & Tilt Range Lateral Tilt -103° to +40° Vertical Tilt -40° to +40° Panning Range 360° Physical Ball Sphere Diameter 2.56" / 65.0 mm Dimensions H: 5.8 x W: 3.1 / H: 147.3 x W: 80.0 mm Weight 57.6 oz / 1.63 kg. The ability to tilt the ball-and-socket joint down to angle beyond 90° can be uséd to quickly level a camera placed on this 057 Magnesium Ball Head without having to adjust the tripod the ball head is connected to. Camera Mounting Screw 1/4"-20 Male, 3/8"-16 Male. Quick Release Plate Type Q5. Load Capacity 33.1 lb / 15.01 kg.Number of Bubble Level(s) 3. Lateral Tilt -103° to +40°. Vertical Tilt -40° to +40°. Ball Sphere Diameter 2.56 / 65.0 mm.
Dimensions H: 5.8 x W: 3.1 / H: 147.3 x W: 80.0 mm. Weight 57.6 oz / 1.63 kg.Sorry, our items are NOT available for pick-up. No additional information at this time. Battle Steel MRO Full Co-Witness Optic Mount MADE IN USA. Adidas Face Cover 3 Pack. This item is in the category "Cameras & Photo\Tripods & Supports\Tripod Heads".
The seller is "botach" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.