Ikan EC1 Beholder 3-Axis Gimbal Kit with Dual-Grip Handle & Quick Release Plate

Ikan EC1 Beholder 3-Axis Gimbal Kit with Dual-Grip Handle and quick release plate. Item is used, but it has been fully tested and working.

Dual grip handle and ARCA quick release plate included. 360 Degree Movement from All Axis (Pitch, Yaw & Roll). Works with DSLR & Mirrorless Cameras between 2.0 to 4.5 lbs. Equipped with 3 Axis Gyro Stabilized Brushless Motors to Balance Most Mirrorless & DSLR Cameras. OLED Display Screen to show operating modes.

Equipped with 32-Bit Controller & 12-Bit Encoder. Lithium Battery Powered- Low Maintenance, Eco-Friendly.

Illuminated joystick indicating on-off status. The Beholder EC1 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of medium and small cameras weighing up to 4.5 lbs. The Beholder EC1 is lightweight, easy to use, and can be carried in the supplied case or a small photographer bag. The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion. Designed for DSLR & Mirrorless Cameras.

With a payload of up to 4.5 lbs. The EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. Sony a6500, Sony a7SII, Panasonic GH5, and the Canon 5D Mark IV are just a few cameras that the EC1 can handle. EC1 with Canon 5D mk IV.

EC1 with Sony a7S II. Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. In Lock Mode, the Yaw, Pitch, and Roll axis work together to keep the camera pointed in one direction.

The camera's composition will stay the same no matter how you move the handle. Quickly lock your camera into any position by manually pointing and holding it in any direction.

After a few seconds, the camera will lock and hold its position until it is reset back to default. Switch to Inverted Mode at any time by simply flipping the handle over the camera.

Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes. The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll.

Lock Mode will allow the camera to hold a certain direction, and will not follow, pan, or tilt. Pan-Follow Mode allows the gimbal to follow pan axis, and hold the tilt position. Follow Mode allows the camera to follow both tilt and pan directions.

3-Axis Follow Mode has no restrictions as it allows the camera to follow pan, tilt, and roll. A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.

With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools. This item is in the category "Cameras & Photo\Tripods & Supports\Stabilizers". The seller is "mymerchant" and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Iraq, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d'Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Western Sahara, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, British Virgin Islands, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Tuvalu, Germany, Egypt, Latvia, Jamaica, Niue, South Africa, Brunei Darussalam, Honduras.

Brand: ikan
Type: Gimbal Stabilizer
Model: iKan ec1 beholder
To Fit: Camera
UPC: 847983017171