Use lever principle, resulting in high locking force, lock the ball firmly, Max. Vertical load is about 30kg, Max. Bearing when tilted in 90 degrees is about 10kg; 4.
When tilted in 90 degrees, the vertical error between the clamp and the ground is less than 3 degrees; when tilted in 45 degrees with bearing, after locking the ball, the free hang down range of the clamp is not more than 1mm; 5. Top is a clamp of 64mm in diameter, with a spirit level and a compass, jaws using RRS / ARCA-SWISS 39mm standard, can be replaced for upgrading; 6. The bottom diameter is approx. 66mm, using UNC 3/8 screw hole; 7. The ball is locked by a metal master knob of approx. 37mm in diameter, the knob is also provided with a separate damping setting knob; 8. Bottom is a 360 degrees panoramic base, every 30 degrees as one segment, and the error is approx.1 degree; with independent control knob, and built-in damping oil in the base. Made of aviation aluminum, CNC precision machining, non-slip rubber pads at the front side, drop-proof screw at the back side, comes with 1/4 stainless steel screw; 2.
Improved design, the maximum size is about 60 x 38.5 x 10mm, weight about 40g; 3. With standard AS interface, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI ball head and clamp of AS standard interface.
1 x iShoot Ball Head IS-FB52JZ64 1 x Quick Release Plate QS-60. (The other items in the photos not listed here are for illustrating only, not included). This item is in the category "Cameras & Photo\Tripods & Supports\Other Tripods & Supports". The seller is "photoloving-online" and is located in this country: CN.This item can be shipped worldwide.