With pan bar & plate. This head is in Very nice visual and outstanding operational condition (See Photos). It shows very little wear.
Please check out the photos to see the nice condition of this head. It is very fluid, with no weak or dead spots, nor any fluid leaks.Both pan and tilt locks work great and lock the head securely. This head has a variable counterbalance control to accommodate varying camera loads. This head comes with a pan bar, a sliding QR Camera Plate, and a copy of the user manual. You will not find one in nicer condition. I guaranty you will love it.
The Vision 6 pan and tilt head embodies LF drag assemblies for pan and tilt motions and an adjustable camera mounting plate. It is available in different balance spring configurations, which enables it to balance a wide range of cameras. Both the pan and tilt mechanisms incorporate the patented Vinten lubricated friction (LF) system to ensure smooth movement of the camera about these axes and are fitted with control knobs to adjust the drag setting.
The whip-pan facility is unaffected by the pan drag setting. Friction brakes on each axis allow the head to be locked at any chosen position. The operating knobs for both brakes are fitted at the left-hand side of the head. An illuminated level bubble is fitted to the rear of the head.When the switch is pressed, the bubble will be illuminated for approximately 15 seconds. The Vision 6 pan and tilt head embodies an adjustable spring counterbalancing mechanism, LF. Drag assemblies for pan and tilt motions and an adjustable camera mounting plate.
The balance system is easily adjusted by a knob on the rear of the head. Maximum and minimum payloads that can be balanced, and tilt ranges, are dependent on the weight of the camera. And accessories and on the cente. LF (Lubricated Friction) Drag Control. To provide the right amount of resistance, the Vision 3 uses the field proven Vinten LF (Lubricated Friction) damping system.
Featuring a progressive, stiction free drag, where the torque is provided from a sliding contact between dissimilar surfaces. The variable drag is adjusted to provide a non-linear torque speed characteristic, which allows "whip pan" movements. Tough die-cast body ensures robustness, while quality design and construction provide a lifetime of precision. Adjustable camera mounting plate with unique rubber grip strips holds the camera rock steady. Built-in illuminated bubble for horizontal leveling, ensuring easy leveling even under unfavorable lighting conditions.Maximum load capacity depending on optional counterbalance spring (not included): 2.2 to 22.0 lbs. Head 2.3 kg (5.0 lb). Pan bar 0.2 kg (0.4 lb). Bowl clamp 0.14 kg (0.3 lb). Height to mounting face 12.1 cm 4.76 in.
Length 12.9 cm 5.08 in. Width 14.8 cm 5.83 in. Load capacity Up to 10 kg (22 lb). Tripod fixing 75 mm ball. Please see my other listings for more great items, including a Vinten tripod to fit this head.Each listing includes an accurate description and at least one picture of the actual item. The item "Vinten Vision 6 Pro Video Fluid Head with pan bar & plate Very Nice" is in sale since Wednesday, May 2, 2018.
This item is in the category "Cameras & Photo\Tripods & Supports\Tripod Heads". The seller is "epicure" and is located in Littleton, Massachusetts. This item can be shipped worldwide.