Quick Release Plate

SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit

SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit

SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit

SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit. 1 x Arri Extension Arm 1807. 1 x Extension Arm (Arri Rosette) 1870. 1 x Arri Rosette Handle 1963. Shoulder Rig Handle Kit 2002.

2 x Rubber Handle 1963. 2 x Rosette Arm 1684. 1 x 15mm Rosette Bracket 1898.

1 x Rod Clamp 1686. 1 x Rosette Handgrip 1810. 1 x 15mm Rod Clamp with ARRI Rosette 1898. Note: Shoulder Pad 1954 is compatible with Sony VCT-14, NOT compatible with Sony VCT-U14. SmallRig Sony VCT-14 Shoulder Plate 1954 is compatible with Sony VCT-14 tripod adapter plates.

It could be attached and detached fast, able to support heavy device and keen to get a balance when the camera is mounted on it. It features a Manfrotto 501 quick release plate, and shooting on the shoulder, in the hands and on the tripods could be switched swiftly. Part of the baseplate extends out beyond the 15mm LWS rod adapter in the front. With rod adapter set back, additional space in the front is achieved to mount follow focus.

It enables to position the camera backwards to some degree on the plate, so as to get the balance of your rig directly over your shoulder. The rod adapter is vertically adjustable by 23mm to fit different types of cameras, like FS7/FS7II/FS5/Ursa Mini/Canon C100. What's more, it is equipped with a 15mm LWS rod adapter on the rear side.

Manfrotto 501 quick release plate, which is compatible with Manfrotto 577 quick release adapter could be slid about 80mm forwards or backwards when the wingnut is loose. An ARRI M6 rosette is available to attach accessories and grips, and multiple 1/4-20 threaded holes on the side could provide additional mounting options. In addition, the shoulder pad is so soft that your shooting will be more pleasant.

Compatible with Sony VCT-14 tripod adapter plates. Arri M6 rosette to attach accessories and grips. Front rod adapter is vertically adjustable by 23mm to fit different types of cameras.

Enough space to mount follow focus in the front. Manfrotto 501 quick release plate could be slid about 80mm forwards or backwards. 1/4-20 threaded holes on the right side for additional accessories.

SmallRig Arri Extension Arm 1807 provides 198mm of extension for ArrI-standard rosette handgrips and other gears with Arri style rosette mount, such as RED, URSA Mini, Sony FS7 or other. It features a M6 male thread on one end and a M6 female thread on the other end. The arm itself has multiple 3/8"-16 and 1/4"-20 threaded holes for attaching accessories. Arri standard rosette (31.8mm diameter), quite solid. Male M6 thread on one end and female M6 thread on the other end. 3/8"-16 & 1/4"-20 accessory threads. Cameras like RED, URSA Mini or other ARRI style accessories. 1 x Arri Extension Arm. SmallRig Extension Arm with Arri Rosette 1870. SmallRig Extension Arm with Arri Rosette 1870 is used for handle extension. The extension arm is adjusted via NATO rail, with the extension range of 168-260mm.

The screw can prevent accidental removal. Arri rosette could attach rosette handle, such as SmallRig wooden handle 1941 and Arri Rosette Handle 1810. Arri rosette could attach Sony FS5 Camcorder Baseplate 1827 and other rosette devices as well.

In addition, the Arri rosette could be a female and a male head. Screw is used to prevent accidental removal. Arri rosette could attach rosette devices.

Arri rosette could be a female and a male head. 1 x Extension Arm (Arri Rosette). Product Dimensions : 203 x 50 x 35mm. Package Dimensions: 200 x 140 x 40mm. SmallRig Arri Rosette Handle (Rubber) 1963 attaches to any Arri compatible rosette accessories with a M6 thread mounting hole.

For example, it can be used with SmallRig Cage 1828 and SmallRig Dogbone Arri Rosette Arm 1684. This handgrip comes with an Arri standard rosette (31.8mm diameter) and an M6-threaded locking lever. It allows free angle adjustment. It is equipped with a cold shoe mount, and you can attach additional accessories, like flash or LED video lights, microphone etc to it.

The holding part is made of rubber, which increases the friction of hand for easy operation. Compatible with any Arri standard accessories. Allows shoe mount accessories attachment.

1 x Arri Rosette Handle. Material(s): Aluminum Alloy + Rubber. SmallRig Shoulder Rig Handle Kit 2002 attaches 15mm rods for shoulder mount shooting. The shoulder rig handle kit comes with independent anti-slip handles utilizing SmallRig rosettes. Each arm is equipped with an array of threaded holes.

Put the handgrips in front of your body for better camera control. Threaded holes on arms are for attaching accessories. Four main pivoting points can rotate 360°that are controlled separately by black tension levers.

This offers you unlimited position options. The quick release clamp saves your time on operation when attaching rods, just by tightening the black lever on the bottom. It is ideal for quick, lightweight, shoulder-mounted configurations. Attaches 15mm rods for shoulder-mounted shooting.

The diameter of the rosette is 31.8mm. SmallRig 15mm Rod Clamp with Arri Rosette 1686 can be attached to any equipment that features a 15mm rod system. Use the rod Arri Rosette and M6 female head to attach any accessory such as an arm, EVF support, etc. SmallRig Arri Rosette Handgrip for DSLR Cameras 1810 can be attached to any Arri compatible rosette accessories with a M6 thread mounting hole. For example, it can be used with Cage 1828 and Dogbone Arri Rosette Arm 1684. This handgrip features an Arri standard rosette (31.8mm diameter) and a M6-threaded locking lever. It allows to adjust the angle freely to get a pleasant holding. With a cold shoe mount, you can attach additional accessories, like flash or LED video lights, and microphone etc. SMALLRIG 15mm Rod Clamp with ARRI Rosette 1898 is mainly applied to 15mm LWS shoulder rigs system. It allows to attach 15mm rods, securely locking with two M5 ratchet wingnuts. The 15°tilt design makes it more comfortable using ARRI standard handles during shoulder-mounted shoot. Besides, increasing a row of 1/4''-20 thread holes on the top, this provides more mounting points for additional accessories. This rod clamp is made of high-graded aluminum alloy and stainless steel, solid and durable. 15°tilt design for comfortable holding. Easy to lock with two thumbscrews underneath.

Plenty of 1/4''-20 thread holes for more accessories. CNC machined, solid and durable. Material: Aluminum Alloy + Stainless Steel.

Customers from United States / United Kingdom / Germany / France /. Customers from other countries, Pls contact with us for Expedited.

Probably take longer time for your item to arrive at the final. Return must be in the original package, and with ALL original. In its original condition and packaging with all components and. Or, you may choose to have a replacement. We will pay the mailing.

We are professional camera rig maker for 9 year. All the item is design by our team , manufacture by our team. The item "SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit" is in sale since Tuesday, September 25, 2018. This item is in the category "Cameras & Photo\Tripods & Supports\Stabilizers".

The seller is "hdjoys" and is located in Shenzhen,Guangdong. This item can be shipped worldwide.
  • Manufacturer Warranty: 2 Years
  • UPC: Does not apply
  • To Fit: Camcorder
  • MPN: Does Not Apply
  • Country/Region of Manufacture: China
  • Compatible Brand: For Canon
  • Brand: SmallRig
  • Type: Shoulder

SmallRig Quick Release Plate Fr Sony VCT-14 Shoulder/Extension Arm/Handle Kit