Use lever principle, resulting in high locking force, lock the ball firmly, Max. Vertical load is about 30kg, Max. Bearing when tilted in 90 degrees is about 10kg; 4.When tilted in 90 degrees, the vertical error between the clamp and the ground is less than 3 degrees; when tilted in 45 degrees with bearing, after locking the ball, the free hang down range of the clamp is not more than 1mm; 5. Top is a clamp of 64mm in diameter, with a spirit level and a compass, jaws using RRS / ARCA-SWISS 39mm standard, can be replaced for upgrading; 6. The bottom diameter is approx. 66mm, using UNC 3/8 screw hole; 7. The ball is locked by a metal master knob of approx. 37mm in diameter, the knob is also provided with a separate damping setting knob; 8. Bottom is a 360 degrees panoramic base, every 30 degrees as one segment, and the error is approx. 1 degree; with independent control knob, and built-in damping oil in the base. 1 x iShoot Ball Head IS-FB52JZ64 1 x Quick Release Plate QS-60.
(The other items in photos not listed here are for illustrating only, not included). We would do our best to answer your questions, send your items as soon as possible and help you whenever theres a problem. A negative or neutral feedback or a case could not help at all, but would hurt our shop badly. United Kingdom / Australia / Canada / France / Spain / Germany. Brazil / Eastern Europe and other regions.
Because transit time and local charges highly depends on local postal service or carrier. The item "Heavy-duty Ball Head Panning Base + Camera Quick Release Plate MAX. LOAD 30KG" is in sale since Friday, April 27, 2018.This item is in the category "Cameras & Photo\Lighting & Studio\Light Stand & Boom Accessories". The seller is "ishoot-photography" and is located in CN.
This item can be shipped worldwide.