Impeccable combo of style, design, functionality, economic price, and much more, Flycam DSLR Nano video stabilizer exceeds all its competitors in value and utility too! Featuring a three-axis gimbal and foam hand grip, makes this camera stabilizer to capture professional-looking handheld footage. Additionally, the Aluminum steadycam comes with an assortment of counter weights to ensure a perfect balance. You can freely move your camera - panning, tilting, booming or running without any camera instability or fuzz. Try your hands on one of our incomparable gear that always remain ready for action and challenges!
WHAT'S IN THE BOX - FLYCAM DSLR Nano Camera Steadycam with Arm Support Brace Arm Support Brace - COMPLIMENTARY Quick Release - Storage bag. FEATURES - Rugged, Lightweight, handheld Steadycam.
Hi- Strength black anodized Aluminum construction. Adjustable telescopic post with locking knob. Allows unrestricted Booming and 360 degree Panning. Foam padded Handle Grip for fatigue free shooting.
Perfect Handheld Stabilizer to capture professional-looking handheld footage. Designed for compact and light weight cameras weighing up to 1.5kg/3.3lbs.Three-Axis Gimbal with Foam padded Hand Grip. Cushioned comfort Arm Brace for reducing stress on wrist. Fast set up and easy to use - Quick release for fast setup. Fully adjustable telescopic sled for perfect balance. Quality Camera quick release and universal camera mount. Precision bearings for smooth rotation. Designed for compact, low profile cameras weighing up to 1.5kg/3.3lbs. SPECIFICATIONS - DSLR Stabilizer constructed of cast aluminum with a black power coating - Minimum length : 38cm - Maximum length : 56cm - Construction - Aluminum black anodized stabilizer - Weights disc made of MS & Powder coated - Quick Release Mounting Screw : 1/4-20 - Load capacity -1.5kg/3.3lbs - Total Weight cups 4 - Total weight disc 16 - Outer Dia of Arm brace-21.70mm - Inner Dia of Arm brace-18.44mm - Weight disc diameter - 65mm - Weight thickness - 4.5mm - Central Support Post - 23mm diameter - Diameter of sled - 23mm - DSLR Stabilizer weight - 1.60 Kg - Single disc weight - 95 grams - Base Platform has 1/4 mounting hole - Industrial grade Camera Platform knobs - Matt black stabilizer. DSLR FLYCAM NANO HANDHELD STEADYCAM. UNIVERSAL BASE PLATE The Camera Base plate of the video stabilizer has 1/4mounting slots (holes) to accommodate all variety of camera bases. Ergonomic control knobs allow quick, precise adjustment of the top stages back and front, and right-to- left side movement. These controls allow you to adjust the cameras horizontal balance. STEADYCAM GIMBAL Wheelbarrow bearing provides rotational camera control with easy on axis movement. The handgrip swivels left and right from the bolt. You can easily move whole hand held steadycam up and down. Angle bracket enables grip to move up and down. STEADYCAM HANDLE Steadycam handle of FLYCAM DSLR Nano Handheld Steadycam is extra smooth, easy to grip move it up and down or side-to-side according to your need. Soft foam grip make it easy on hands and supplies slip free control.
BALANCING THE CAMERA This DSLR stabilizer system contains weights to balance the camera on stabilizer. Add or remove weights as per your cameras requirement.TELESCOPIC POST In order to adjust the camera's vertical balance you can adjust the length of telescoping Central Post, when balanced properly the camera floats, ready for your shooting. By varying the amount of Counter Weights on the Base Platform, or by changing the length of the no-tools telescoping Central Post, you adjust the camera's vertical balance. When balanced properly the camera floats, ready for you to move into action. STABILIZER ARM SUPPORT BRACE Stabilizer's Arm Brace is very useful for all cameras. Not only it gives you the ability to use the Flycam handheld steadycam for longer periods of time, it also removes a lot of the strain from your wrist. It has an aluminum bar that runs the full length of the brace. Attached to the end of the bar is an aluminum post that inserts into the handle of the Flycam, allowing your arm to support the weight. Your palm and fingers wrap around the handle to provide additional support and control. The angle of the handle can also be adjusted by choosing one of the additional mounting holes for individual comfort and a variety of shooting positions.
Examples are straight up for low shots and straight out for higher shots. The Stabilizer Arm Brace is foam padded and mounts securely around your forearm, using Velcro straps and elastic for quick access and individual fit.Compatible Camera Names Canon - 5d Mark II, EOS7D, 1000D, 40D, 50D, 450D, 60D, 1100D, 30D, 20D, 3 50D, 450D, Rebel XSI, XT, T2I, 500D, 550D, Rebel 500D Sony - A230, A330, A350, A380, A200, A580, A900, A700, A100, A290, A450, A500, A390, A850, A300, A560, A290 Nikon - D70, D90, D40, D60, D40X, D3, D3X, D3S, D5000, D3100, D3000, D80, D60, D700, D300, D3S Panasonic - Lumix Gla, DMC-FZ 50K, GH1, GH2, G1, G10, DMC- FZ7 Fuji - S3500, S6900, S2500, S1800, HS10, S700, S8000, S5800, 5200EXR, S3, S5 S5200HD, 58000FD, S3, S5. There may be some delay in processing orders placed on weekends. Return is accepted within 30 days of receiving the item sent. The return is acceptable only in case of manufacturing or functionality problem in the product. Our aim is to Provide Top Level Customer Service, We will try our best to solve any problem (if any). The item "Flycam Nano Steadycam Arm Brace Quick release plate for camera upto 1.5 kg + Bag" is in sale since Saturday, August 19, 2017. This item is in the category "Cameras & Photo\Tripods & Supports\Other Tripods & Supports".
The seller is "proaimcanada" and is located in Vancouver, BC. This item can be shipped to Canada, United States.